product

•  control block
•  home

REACH-compliant

•  yes

definition 1

•  ALU.BUS+DRAAD M16X1.5 BUITENDIAM. 24 LENGTE 50 MM, BINNENDIAM. 19 MM MET OPST.RAND
•  HY1, complete with 1 cylinder, 1 unlocking, remote controle button
•  HY1, complete with cylinder, 1 unlocking, remote controle button, brass gland, incl. 2 nuts
•  PVC for control block, L=20,8mm
•  light running release,, M10 Thread, inc plated eyes 8mm
•  special, control button
•  ultra light release head, M10 thread, Zinc plated eye 8mm

additional information 1

•  According to drawing 423.00.035.Pos.2C
•  according to drawing 423.00.032. Pos1B, button as per drawing 423.00.043
•  according to drawing 423.00.037
•  square 15x15, diameter 8.1, eye and hole for control lever in one line. according to drawing 423.00.031

product

•  control block 15x15, diameter 8.1.
•  operating block square 15x15, diameter 8,1, eye and hole for operating lever perpendicular to each other.

S Product coding

•  HY1
•  HY3
•  ULA-ST

definition 2

•  DIAM. 34 MM + KNOP LENGTE 25 MM M6, BINNENDIAM. 18,5 MM X 10 MM TEK.KNOP 23/6/8, CONFORM AANGEPASTE TEKENING D.D. 18.05.2009
•  LA-ST M10x1
•  by unlocking 180 degree connector

Stroke length

•  800mm
•  1400mm
•  1500mm

definition

•  for gas spring

additional information

•  According to drawing 423.00.035.Pos.2C L=35mm, for cable pull control, according to drawing 423.00.033.Pos. 2B square 15x15, diameter 8.1, eye and hole for control lever perpendicular to each other. according to drawing 423.00.037
•  according to drawing 423.00.032. Pos1B, incl. cylinder head according to drawing 423.00.043 square 15x15, diameter 8,1, eye and hole for operating lever at right angles to each other. according to drawing 423.00.037
•  according to drawing 423.00.032. Pos1B, incl. cylinder head according to drawing 423.00.043 square 15x15, diameter 8.1, eye and hole for operating handle aligned. according to drawing 423.00.031
•  control block, cable control

set name

•  control block, cable control, angled version L=35mm.
•  operating block with lever, angled design 130mm.
•  operating block with lever, straight design 130mm.

additional information

•  according to drawing 423.00.033

remark

•  according to drawing 423.00.035

additional information

•  Pos. 2C L=35

additional information 1

•  Pos. 2B square 15x15

additional information 2

•  diameter 8.1

additional information 3

•  eye and hole control on 1 line

additional information

•  Let op, alleen knop zonder stang 888.170.300.154
•  according to drawing 423.00.031

additional information 1

•  for cable pull control